ZeroWater 40-Cup Glass Dispenser in Silver

The ZeroWater 40-Cup Glass Water Dispenser is unlike any other leading water dispenser. By utilising a patented 5-stage Ion Exchange Filtration system this dispenser can remove virtually all dissolved solids from your drinking water. Equipped with a one-hand push-and-pour spout, this dispenser is user-friendly and allows you to fill your cup or favourite water bottle without any lifting. Using ZeroWater’s Ready-Pour™ technology the 40-cup glass dispenser is the largest capacity filtered dispenser on the market and allows you to pour already filtered water whilst water which hasn’t yet filtered remains safely in the reservoir. This dispenser is stylish with its premium stainless steel and glass construction, perfect for gatherings with friends and family or office and commercial use. 

Key Features

• 40-Cup / 9L total capacity
• Patented 5-stage Ion-Exchange Filtration system
• Removes 99.6% of TDS (Total Dissolved Solids)
• Laboratory-grade water quality metre included
• Certified* to reduce Lead and PFAO/PFOS (“forever chemicals”)

5-Stage Ion Exchange Filtration

ZeroWater’s patented 5-Stage Ion Exchange Filtration system can remove 99% of all Fluoride and other inorganics, such as nitrates. Additionally, IAPMO certification proves the filter reduces PFOA/PFOS (“forever chemicals”), Lead, Chromium and Mercury, meaning you can rest assured that your water is of the highest quality. Your water will pass through a coarse filter screen to remove any suspended solids such as rust and dirt that make your water appear cloudy, and then a foam distributor will remove any additional suspended solids. Next, a multi-layer activated carbon and oxidation reduction alloy will remove organic contaminants such as Mercury, Chlorine, Chloramine, pesticides and herbicides while stopping bacteria from growing. The Dual Comprehensive Ion Exchange Resin will then remove inorganic compounds such as metals, non-metals and even radiological contaminants. Finally, an ultra-fine screen and non-woven membrane layers will remove any remaining solids.

Easy to install and simple to use

Simply twist the filter into the bottom of the reservoir until there is a complete seal between the filter, o-ring and reservoir, fill the reservoir with cold tap water and place the lid on top, allowing the water to pass through before re-filling. Store in or outside your refrigerator depending on your water temperature preference to enjoy the safest, purest-tasting water. 

Equipped with a laboratory-grade water quality metre 

It is not uncommon for UK tap water to contain TDS (Total Dissolved Solids) between 100-500 PPM. You can rest assured your water quality is pristine with the included laboratory-grade water quality metre. After passing through ZeroWater’s patented 5-Stage Ion Exchange Filtration system the metre will deliver a reading of “000” PPM (Parts Per Million) leaving you confident in the quality of your drinking water. Please note that it is normal for this reading to increase as the filtration system ages while still filtering your water to impeccable levels of cleanliness. Once the TDS metre reads “006” or above, replace your filter to ensure you are maintaining high-quality water filtration. 

*Certified to NSF/ANSI standards 42 and 53. Issued 5/7/2021

Extra Information

ZeroWater Filter Performance Sheet